Altechna, UAB (Lithuania): Altechna (Lithuania): Optical equipment manufacturer
Please contact the import agency Taihei Boeki for details.
Electric (motor driven) attenuator Altechna
It is a device that continuously adjusts the laser light remotely. Each attenuator incorporates λ/2 wave plates into 1 plate that is rotated by a motor, and the input beam is parallel to S-polarization and P-polarization with 1/2 thin-film splitters or polarization beam splitter cubes or split into a vertical output beam. Altechna has multiple lineups according to the application.
PowerXP series (motor driven) Altechna
| COMPACT | MAXI TRANSMISSION | MAXI COLLINEAR | MAXI REFLECTION | MAXI CUBE | |
| Type | Through | Transparency (T model) | Transparency (CL model) | Reflection (R model) | Through/Reflection |
| CA (mm) | Ø8 | Ø18 | Ø18 | Ø18 | Ø18 |
| Maximum incident diameter(mm) | Ø5 | Ø12 | Ø12 | Ø12 | Ø12 |
| LIDT @ 1064nm, 10ns, 10Hz | Up to 20 J/cm² | Up to 10 J/cm² | Up to 10 J/cm² | Up to 10 J/cm² | Up to 10 J/cm² |
| Size (mm) | 35 x 55 x 60 | 56 x 99 x 90 | 56 x 144 x 90 | 56 x 99 x 90 | 56 x 82 x 90 |
| Opening and closing time | <0.2 sec | <0.2 sec | <0.2 sec | <0.2 sec | <0.2 sec |
| Step(maximum-Minimum | 14400 | 24000 | 24000 | 24000 | 24000 |
| resolution | <11.25 arcsec/step | <7 arcsec/step | <7 arcsec/step | <7 arcsec/step | <7 arcsec/step |
| Maximum transparency(output | Tmax> 99% at p-pol | Tmax> 95% at p-pol | Tmax> 95% at p-pol | Tmax> 99% at s-pol | Tmax> 97% at p-pol |
| Tmax> 99% at s-pol | |||||
| Maximum block(output | Tmin <0.1% at p-pol | Tmin <0.5% at p-pol | Tmin <0.5% at p-pol | Tmin <0.3% at s-pol | Tmin <0.3% at p-pol |
| Tmin <3% at s-pol | |||||
| Attenuation range(output | Tmax> 99.7%, | Tmax> 99.5%, | Tmax> 99.5%, | Tmax> 95%, | |
| Tmin <4% at s-pol | Tmin <5% at s-pol | Tmin <5% at s-pol | Tmin <0.5% at p-pol |
PowerXP Maxi Collinear type (motor drive)
An uncoated UVFS window placed at Brewster's angle is added after the polarizing plate to compensate for the lateral beam shift due to the polarizing plate. For ultra-precision applications, the radial beam displacement between the input and output is guaranteed to be less than 100 μm.
Also, by rotating the polarizing plate, the intensity ratio of the separated beams can be continuously adjusted.
Also, by rotating the polarizing plate, the intensity ratio of the separated beams can be continuously adjusted.
The S-polarized beam output can be used for applications that require high-purity S-polarized beams, and the P-polarized beam output can be used for power control and attenuation applications.

CA: φ18mm
Incident beam diameter: φ12 mm
Bandwidth: Up to ±5 nm, up to ±10 (custom)
Type: Transparent
Size: 56mm x 144mm x 90mm
Step (maximum-minimum): 24000
Incident beam diameter: φ12 mm
Bandwidth: Up to ±5 nm, up to ±10 (custom)
Type: Transparent
Size: 56mm x 144mm x 90mm
Step (maximum-minimum): 24000
Attenuation range @ CWL: 0.5% -95%
Opening and closing time: <0.2 sec
Resolution: <7 arcsec / step
LIDT: Up to> 10 J / cm² @ 1064nm, 10ns, 10Hz
Application: High power, pulsed laser
Opening and closing time: <0.2 sec
Resolution: <7 arcsec / step
LIDT: Up to> 10 J / cm² @ 1064nm, 10ns, 10Hz
Application: High power, pulsed laser
| Model | wavelength (Nm) | Bandwidth (nm) | Type | p-pol output (Tmin-Tmax) | Constitution |
| @CWL | |||||
| PXP-18-CL-1064 | 1064 | ±5 | Through | 0.5-95% | λ/2 wave plate (air space) + TFP + window |
| PXP-18-CL-1030 | 1030 | ±10 | |||
| PXP-18-CL-0532 | 532 | ±5 | Through | 0.5-95% | |
| PXP-18-CL-0515 | 515 | ||||
| PXP-18-CL-0355 | 355 | ±5 | Through | 0.5-95% | λ/2 wave plate (optical contact) + TFP + window |
| PXP-18-CL-0343 | 343 |
PowerXP Maxi Cube type (motor driven)
Altechna's PowerXP Maxi Cube is an electric motor type with a polarization separation angle that is convenient for optical systems for high energy applications. The perfect solution for power control, attenuation and beam splitting in demanding laser machining applications.

CA: φ18mm
Incident beam diameter: φ12 mm
Bandwidth: Up to ±5 nm, up to ±10 (custom)
Type: Transmissive / Reflective
Size: 56mm x 82mm x 90mm
Step (maximum-minimum): 24000
Attenuation range @ CWL: 0.3% -97% @ Transmission mode
Opening and closing time: <0.2 sec
Resolution: <7 arcsec / step
LIDT: Up to> 10 J / cm² @ 1064nm, 10ns, 10Hz
Application: High power, pulsed laser
Opening and closing time: <0.2 sec
Resolution: <7 arcsec / step
LIDT: Up to> 10 J / cm² @ 1064nm, 10ns, 10Hz
Application: High power, pulsed laser
| Model | wavelength (Nm) | Bandwidth (nm) | p-pol output (Tmin-Tmax) | s-pol output (Tmin-Tmax) | Constitution |
| @CWL | @CWL | ||||
| PXP-18-C-1064 | 1064 | ±5 | 0.3-97% | 3-99% | λ/2 wave plate (air space) +PBS (optical contact) |
| PXP-18-C-1030 | 1030 | ||||
| PXP-18-C-0532 | 532 | ±5 | 0.3-97% | 3-99% | |
| PXP-18-C-0515 | 515 | ||||
| PXP-18-C-0355 | 355 | ±5 | 0.3-96% | 4-99% |
PowerXP Compact type (motor drive)
Altechna's PowerXP Maxi Cube is an electric motor type with a small footprint and optical system for high energy applications.The perfect solution for power control, attenuation and beam splitting in demanding laser machining applications.

CA: φ8mm
Incident beam diameter: φ5 mm
Bandwidth: Up to ±5 nm, up to ±10 (custom)
Type: Transparent
Size: 35mm x 55mm x 60mm
Step (maximum-minimum): 14400
Incident beam diameter: φ5 mm
Bandwidth: Up to ±5 nm, up to ±10 (custom)
Type: Transparent
Size: 35mm x 55mm x 60mm
Step (maximum-minimum): 14400
Attenuation range @ CWL: 0.1% -99%
Opening and closing time: <0.2 sec
Resolution: <11.25 arcsec / step
LIDT: Up to> 20 J / cm² @ 1064nm, 10ns, 10Hz
Application: High power, pulsed laser
Opening and closing time: <0.2 sec
Resolution: <11.25 arcsec / step
LIDT: Up to> 20 J / cm² @ 1064nm, 10ns, 10Hz
Application: High power, pulsed laser
| Model | wavelength (Nm) | Bandwidth (nm) | Type | p-pol output (Tmin-Tmax) | Constitution |
| @CWL | |||||
| PXP-08-1064 | 1064 | ±5 | Through | 0.1-99% | λ/2 wave plate (optical contact) +HCTFP |
| PXP-08-1030 | 1030 | ||||
| PXP-08-0532 | 532 | ±5 | Through | 0.1-99% | |
| PXP-08-0515 | 515 | ||||
| PXP-08-0355 | 355 | ±5 | Through | 0.3-96% | |
| PXP-08-0343 | 343 |
PowerXP Maxi Transmission type (motor drive)
Altechna's PowerXP Maxi Cube is an optical system and electric motor type for high energy applications. The perfect solution for power control, attenuation and beam splitting in demanding laser machining applications.

CA: φ18mm
Incident beam diameter: φ12 mm
Bandwidth: Up to ±5 nm, up to ±10 (custom)
Type: Transparent
Size: 56mm x 99mm x 90mm
Step (maximum-minimum): 24000
Incident beam diameter: φ12 mm
Bandwidth: Up to ±5 nm, up to ±10 (custom)
Type: Transparent
Size: 56mm x 99mm x 90mm
Step (maximum-minimum): 24000
Attenuation range @ CWL: 0.5% -95% @ Transmission mode
Opening and closing time: <0.2 sec
Resolution: <7 arcsec / step
LIDT: Up to> 10 J / cm² @ 1064nm, 10ns, 10Hz
Application: High power, pulsed laser
Opening and closing time: <0.2 sec
Resolution: <7 arcsec / step
LIDT: Up to> 10 J / cm² @ 1064nm, 10ns, 10Hz
Application: High power, pulsed laser
| Model | wavelength (Nm) | Bandwidth (nm) | Type | p-pol output (Tmin-Tmax) | Constitution |
| @CWL | |||||
| PXP-18-T-1064 | 1064 | ±5 | Through | 0.5-95% | λ/2 wave plate (air space) +TFP |
| PXP-18-T-1030 | 1030 | ±10 | Broadband | ||
| PXP-18-T-0532 | 532 | ±5 | Through | 0.5-95% | |
| PXP-18-T-0515 | 515 | ||||
| PXP-18-T-0355 | 355 | ±5 | Through | 0.5-95% | λ/2 wave plate (optical contact) +TFP |
| PXP-18-T-0343 | 343 | ||||
| PXP-18-T-0266 | 266 | ±5 | Through | 0.5-95% |
PowerXP Maxi Reflection type (motor drive)
Altechna's PowerXP Maxi Cube is an optical system and electric motor type for high energy applications. The perfect solution for power control, attenuation and beam splitting in demanding laser machining applications.

CA: φ18mm
Incident beam diameter: φ12 mm
Bandwidth: Up to ±5 nm, up to ±10 (custom)
Type: Reflection
Size: 56mm x 99mm x 90mm
Step (maximum-minimum): 24000
Attenuation range @ CWL: 0.5% -95% @ Transmission mode
Opening and closing time: <0.2 sec
Resolution: <7 arcsec / step
LIDT: Up to> 10 J / cm² @ 1064nm, 10ns, 10Hz
Application: High power, pulsed laser
Opening and closing time: <0.2 sec
Resolution: <7 arcsec / step
LIDT: Up to> 10 J / cm² @ 1064nm, 10ns, 10Hz
Application: High power, pulsed laser
| Model | wavelength (Nm) | Bandwidth (nm) | Type | s-pol output (Tmin-Tmax) | Constitution |
| @CWL | |||||
| PXP-18-R-1064 | 1064 | ±5 | Reflection | 0.3-99% | λ/2 wave plate (air space) +2x TFP |
| PXP-18-R-1030 | 1030 | ±10 | Broadband reflection | 0.3-99% | |
| PXP-18-R-0532 | 532 | ±5 | Reflection | 0.3-99% | |
| PXP-18-R-0515 | 515 | ||||
| PXP-18-R-0355 | 355 | ±5 | Reflection | 0.3-99% | λ/2 wave plate (optical contact) +2x TFP |
| PXP-18-R-0343 | 343 | ||||
| PXP-18-R-0266 | 266 | ±5 | Reflection | 0.3-99% |
Watt Pilot type (motor drive)
Altechna's Watt Pilot series incorporates a motor-driven rotary λ / 2 wave plate and a high-energy polarizing beam splitter cube to split S- and P-polarized beams orthogonally.
Select P-polarization for maximum transmittance and S-polarization for maximum attenuation. The intensity ratio of these two beams can be adjusted continuously by rotating the wave plate.

CA: φ12mm
Incident beam diameter: φ8 mm
Bandwidth: Up to ±10 nm
Type: Transparent
Size: 70mm x 91mm x 63mm
Step (maximum-minimum): 3900
Incident beam diameter: φ8 mm
Bandwidth: Up to ±10 nm
Type: Transparent
Size: 70mm x 91mm x 63mm
Step (maximum-minimum): 3900
Attenuation range @ CWL: 0.5% -95%
Opening and closing time: <3 sec
Resolution: <42 arcsec / step
LIDT: Up to> 20 J / cm² @ 1064nm, 10ns, 10Hz
Application: High power, pulsed laser
Opening and closing time: <3 sec
Resolution: <42 arcsec / step
LIDT: Up to> 20 J / cm² @ 1064nm, 10ns, 10Hz
Application: High power, pulsed laser
| Model | wavelength (Nm) | Bandwidth (nm) | Type | (Tmin-Tmax) | Constitution |
| @CWL | |||||
| SWP-HP-1064 | 1064 | ±10 | Transmission/reflection | 0.5-95% | λ/2 wave plate (air space) +PBS (optical contact) |
| SWP-HP-0532 | 532 | ||||
| SWP-HP-0355 | 355 | ||||
Watt Pilot reinforced type (motor drive)
Altechna's enhanced Watt Pilot is equipped with a motorized λ/2 wave plate and one or two thin film polarizing plates that separate S- and P-polarized beams in parallel.
Select P-polarization for maximum transmittance and S-polarization for maximum attenuation. The intensity ratio of the separated beams can be continuously adjusted by rotating the wave plate.

CA: φ18mm
Incident beam diameter: φ12 mm
Bandwidth: Up to ±10 nm
Type: transmission or reflection
Size: 108mm x 91mm x 63mm
Step (maximum-minimum): 3900
Incident beam diameter: φ12 mm
Bandwidth: Up to ±10 nm
Type: transmission or reflection
Size: 108mm x 91mm x 63mm
Step (maximum-minimum): 3900
Attenuation range @ CWL: 0.3% -99%
Opening and closing time: <3 sec
Resolution: <42 arcsec / step
LIDT: >5 J/cm² @ 1064 nm, 10 ns, 10 Hz
Application: High power, pulsed laser
| Model | wavelength (Nm) | Bandwidth (nm) | Type | (Tmin-Tmax) | Constitution |
| @CWL | |||||
| EWP-R-1064 | 1064 | ±5 | Reflection | 0.3-99% | λ/2 wave plate (air space) + 2x TFP |
| EWP-R-1030 | 1030 | ±10 | λ/2 wave plate (air space) + 2x TFP (wideband) | ||
| EWP-R-0532 | 532 | ±5 | Reflection | 0.3-99% | λ/2 wave plate (air space) +2x TFP |
| EWP-R-0515 | 515 | ||||
| EWP-R-0355 | 355 | ±5 | Reflection | 0.3-99% | λ/2 wave plate (optical contact) +2x TFP |
| EWP-R-0343 | 343 | ||||
| EWP-R-0266 | 266 | ±5 | Reflection | 0.3-99% | |
| EWP-T-1064 | 1064 | ±5 | Through | 0.5-95% | λ/2 wave plate (air space) + TFP |
| EWP-T-1030 | 1030 | ±10 | λ/2 wave plate (air space) + TFP (wideband) | ||
| EWP-T-0532 | 532 | ±5 | Through | 0.5-95% | λ/2 wave plate (air space) +TFP |
| EWP-T-0515 | 515 | ||||
| EWP-T-0355 | 355 | ±5 | Through | 0.5-95% | λ/2 wave plate (optical contact) +TFP |
| EWP-T-0343 | 343 | ±5 | |||
| EWP-T-0266 | 266 | ±5 | Through | 0.5-95% |
