Holo / Or Ltd. (Israel): Holoror: Holoor (Israel):Diffractive Optical Element (DOE) Manufacturer
Please contact the import agency Taihei Boeki for details.
DOE accessories Holo / Or (Holoor)
Unnecessary diffracted light block (UDOB)

A modular product that blocks the unwanted spots of multispots and the "halo" effect of homogenizers to achieve accurate shape and energy distribution at the focal plane.
Setup example

| Model | Length (mm) | Outer diameter (mm) | CA (mm) | Glass material | Maximum angle * (deg) | Document |
| UDOB-001 | 179 | 52 | 22.9 | Fused Silica | 0.107 | |
| UDOB-002 | 179 | 52 | 22.9 | Fused Silica | 0.0895 | |
| UDOB-003 | 179 | 52 | 22.9 | Fused Silica | 0.072 | |
*: Maximum DOE angle [deg] available in UDOB, after this angle UDOB blocks energy
Angle tolerance: +/-0.0045 degrees
Points to note
Recommended maximum input beam diameter: 12mm, wavelength: 355nm -1550nm
DOE tuner module

Holo/Or is a TOP-HAT beam shaper and homogenizer in response to the desire to fine-tune output parameters such as shape/spot size and separation/divergence angle when using DOE. We have developed a variable beam expander that is most suitable for DOE products such as multi-spot. Also, in top hat applications where the accuracy of the incident beam size is important, there is also the use of fine-tuning the incident beam size before DOE.
Holo/Or's DOE Tuner module.
DOE expander

Holo/Or has developed a module that changes the output parameters of the diffractive optical element (DOE).This module reduces or magnifies the entire angle of the DOE's output at some magnification. Unlike common beam expanders, it takes into account the characteristics of Holo/Or's beam shaping, beam splitting, and beam fock, and is designed to minimize aberrations.
Holo/Or's DOE Expander module - for expanding or reducing the DOE full divergence angle.

| Model | magnification | Maximum incident CA (mm) | Maximum angle (CA15mm) (deg) | Maximum angle (CA22.9mm) (deg) | full length* mm) | Outer diameter (mm) |
| DOE_Expander_x2.5 | x2.5 | 22.9 | 4** | 3** | 118.9 | 30.5 |
| DOE_Expander_x4 | x4 | 22.9 | 3** | 2** | 105.4 | 30.5 |
| DOE_Expander_x5 | x5 | 22.9 | 3** | 1.6** | 118.9 | 30.5 |
| DOE_Expander_x7 | x7 | 22.9 | 3.2** | 2.2** | 172.7 | 30.5 |
| DOE_Expander_x10 | x9.7 | 22.9 | 3.2** | 2.5** | 183.2 | 35.0 |
*: Does not include DOE and optional focus lens
**: The maximum angle corresponds to the maximum full angle of DOE when the output shape is square, and 1.4 times the angle when the output shape is round.
**: The maximum angle corresponds to the maximum full angle of DOE when the output shape is square, and 1.4 times the angle when the output shape is round.
Beam shape condensing module
HoLo/Or has developed a new condensing module optimized for Holo/Or beam shapers. Standard condenser lenses (or objectives) are usually optimized for focusing Gaussian beams and not for use with beam shapers. Therefore, using a standard condenser lens for the beam shaper often causes aberrations in the TOP-HAT image, which requires special design of the condenser lens or module. These aberrations usually occur at small focal lengths, short wavelengths, and large input beams.

Image plane by each optical system
Ideal lens

Aspheric Lenses

General lens

Beam shape
Condensing module

| Model | wavelength (Nm) | Focal length (mm) | Outer diameter (mm) | Maximum incident diameter (mm) | Glass material | Length (mm) |
| Objective-001-U | 355 | 50 | 45 | 12 | Synthetic quartz | 38.5 |
| Objective-002-U | 355 | 30 | 45 | 12 | Synthetic quartz | 31.0 |
