Holo / Or Ltd. (Israel): Holoror: Holoor (Israel):Diffractive Optical Element (DOE) Manufacturer
Please contact the import agency Taihei Boeki for details.
Flexi Beam Shaper Holo / Or (Holoor)
Holo/Or has developed a Flexi beam shaper that can control the ratio of rings (periphery) to spots (center) to increase the speed of high power laser welding.
Power is not the only factor limiting the speed of the laser welding process.Physical phenomena such as sputtering, undercut, humping, and welding porosity have a great effect on high-speed welding.
These physics can be significantly mitigated by using a special intensity profile consisting of concentric rings and spots. However, the optimum power ratio for spots and rings depends on the parameters of the welding process and the setup of the system, making it very difficult to find a work point.
Flexi beam shapers allow you to adjust the power ratio between rings and spots, making it easier to find the best work point for each process.
Flexi beam shapers allow you to adjust the power ratio between rings and spots, making it easier to find the best work point for each process.

Welding difference of foil by single mode laser (both weld at the same output and speed)
Gaussian beam spot

By FLEXI beam shaper
Concentric circles and spot beams

A FLEXI beam shaper is a diffractive molding solution consisting of 2 identical diffractive optical elements (DOEs) located on the same optical axis. By rotating this DOE with each other, the beam propagating in it can be formed from a spot (100% output) to a ring with almost no energy in the spot (about 80% output). In addition, the power ratio between these states can be continuously controlled over the entire range.
This passive DOE features high LDT and extremely high angle accuracy, making it suitable for all high power laser welding applications.
Intensity distribution between "ring-spot" with different settings

The FLEXI beam shaper DOE can be easily mounted on a manual or electric rotary mount, making it an optical module.This module can be integrated into the optical axis in multiple configurations and does not require high NA or other expensive optics that differ from standard laser welding optics.
A pair of Flexi beam shapers can be used for both single-mode and multi-mode lasers and can be adapted to several kW of lasers, enabling a wide range of macro / micro welding processes.
The concept of Flexi beam shapers for adjustable ring-to-spot molding was first introduced by Holo / Or in a 2019 academic article.
A pair of Flexi beam shapers can be used for both single-mode and multi-mode lasers and can be adapted to several kW of lasers, enabling a wide range of macro / micro welding processes.
The concept of Flexi beam shapers for adjustable ring-to-spot molding was first introduced by Holo / Or in a 2019 academic article.
It was later improved to a rotary module format and released in 2021. This module was also verified as a test for single-mode high-speed foil laser welding, and it is said that the welding speed can be increasedat up to 700W by more than 30%, and when welding 100μm stainless steel sheets, 2 overlapping, it can be increased at high laser powers close to 1kW by more than 55%.
SM Gauss Spot Welding (without Flexi Beam Shaper)

SM laser (Flexi beam shaper concentric circles and spot beam)

Setup example

Specification.
| Illumination pattern | The central spot and the concentric rings surrounding it, Adjustable power ratio between ring and spot |
| Ring angle | 0.2-20mRad (300-2000um Ring size @ EFL = 255mm (typ) |
| wavelength | 515nm, 532nm, 910-1080nm, other wavelengths |
| After the collimator Incident beam diameter (1 / e ^ -2) | 6-30 mm, other on request |
| mode | Single or multi |
| Polarized light | Not sensitive |
| DOE glass material | UV grade fused silica |
| DOE size | 25.4mm, 50.8mm-150mm (circular, square) |
| DOE thickness | 1.0-3.0 mm |
| Distance between DOEs | <4 mm |
| efficiency | 80% (maximum ring)-98% (maximum spot) |
| Rotation range adjustment | 15deg, other on request |
| Adjustment method | Manual |
| coating | AR / AR |
| Two FLEXI beam shapers are required for adjustable optical performance | |
Product List
| Model | wavelength (Nm) | Ring diameter (mRad) | 0th order light adjustment range(%) | element Type | DOE size (mm) | Data seat |
| CU-330-IYA | 1064 | 1.2 | 0.5-100% | window | φ25.4 [mm] x3t | |
Custom products can also be produced We also have a module product that incorporates two (with a demo machine). | ||||||
